HT COMBI521, Руководство пользователя

Страница: 99 / 144

COMBI521
EN - 99
31. Press the
SAVE key to partially save the test and to end
the sequence of tests . The instrument shows the
message contained in the following screen for a few
seconds.
Repeat the sequence again, if necessary.
STS 15/10 – 18:04
Sequence completed
A
STATUS
32.
Use the three selectors of the adapter and set the
following positions:
 PP State  13A,20A,32A or 63A
 CP State  B
 Fault  OK
Try and remove the connection plug of the adapter EV-
TEST100 in order to check whether the EVSE system
correctly blocks it , as indicated in the screen on the
side.
Use the keys
 ,  to select the option “ OK ” in case of a
positive result, and press the GO/STOP key to carry on
with the test (see no. 34), or select the option “ NO OK ”
and press the GO/STOP key to end the sequence of
tests .
NOTE: some EVSE stations may not be provided with
the mechanical blocking system. In this case, select
the option “OK” to carry on with the tests.
STS 15/10 – 18:04
3/6 – Checking lock Status B
B L o c k
STATUS OK NO OK
33. Press the
SAVE key to partially save the test and to end
the sequence of tests . The instrument shows the
message contained in the following screen for a few
seconds.
Repeat the sequence again, if necessary.
STS 15/10 – 18:04
Sequence completed
B Lock
STATUS