HT COMBI521, Руководство пользователя

Страница: 98 / 144

COMBI521
EN - 98
26. Connect the instrument to the adapter as shown in the
diagram on the display (input B4 to input N , input B3 to
input E and input B1 to input L1 ). Use the three
selectors of the adapter and set the following
positions:
 PP State  NC

CP State

A
 Fault  OK
STS 15/10 – 18:04
3/6 – Checking status A
27. Press the
GO/STOP key. The following screen appears
on the display. Notice the presence of the status “ A ”
corresponding to the position “STATUS”
STS 15/10 – 18:04
L1-N
= - - - V CP = - - - V
L1-PE = - - - V F = - - - Hz
N-PE = - - - V I = - - - A
A
STATUS
28. Press the
GO/STOP key. The result of measurements is
shown in the screen on the side. The instrument displays
the message "
OK " in case of a positive result of the tests
(see Table 3)
STS 15/10 – 18:04
L1-N
= 0 V CP = 12.0 V
L1-PE = 0 V F = 0 Hz
N-PE = 0 V I = 0.0 A
OK
A
STATUS
29.
Press the SAVE key to partially save the test, and to carry on with the subsequent test
(no. 32).
30. The instrument displays the message "
FAIL " in case of a
negative result of at least one test (see Table 3)
STS 15/10 – 18:04
L1-N
= 21.5 V CP = 12.0 V
L1-PE = 0 V F = 0 Hz
N-PE = 0 V I = 0.0 A
FAIL
A
STATUS