![background image](http://html1.mh-extra.com/html/ht/combi521/combi521_user-manual_2178144026.webp)
COMBI521
EN - 26
3.
At the end of the set duration time, the instrument shows
on the display the maximum value among all the partial
measurements performed and the message "
OK
" in case
of a positive result (value lower than the set limit threshold)
or "
NOT OK
" in case of a negative result (value higher
than the set limit threshold).
R P E
15/10 – 18:04
R
I t e s t
T
=
=
=
0 . 5 4
2 0 9 m A
0 s
OK
TMR
2.00
12s
0.01
MODE
Lim
Time
>
<
4. Press the
SAVE
key to store the test result in the instrument’s memory (see § 7.1) or
the
ESC/MENU
key to exit the screen without saving and go back to the main
measuring screen
6.3.2. >
< mode
Fig. 10: Compensation of single cables and remote switch probe resistance
1. Use the
,
keys to select the the virtual key
>
<
2. Connect the alligator clips and/or test leads and/or remote switch probe to the
conductor to be tested as indicated in Fig. 10
3. Press the
GO/STOP
key on the instrument or the
START
key on the remote switch
probe. The instrument starts the calibration procedure of the cables, immediately
followed by the verification of the compensated value.
CAUTION
If message “
Measuring…
” appears on the display, the instrument is
performing measurement. If message “
Verify
” appears on the display, the
instrument is verifying the calibrated value. During this whole stage, do not
unshort the test leads of the instrument.
4. Once calibration is completed, in case the detected value
is lower than 5
, the instrument gives a double acoustic
signal which indicates the positive result of the test and
displays a screen similar to the one reported here to the
side.
R P E
15/10 – 18:04
R
I t e s t
=
=
- - -
- - - m A
STD
2.00
0.01
MODE
Lim
>
<
5. In order to delete the compensation resistance value of the cables, it is necessary to
perform a cable calibration procedure with a resistance higher than 5
at test leads
(e.g. with open test leads).
Содержание COMBI521
Страница 1: ... Copyright HT ITALIA 2021 Release EN 1 01 27 09 2021 COMBI521 User manual ...
Страница 143: ......