HT Italia GSC53N, Инструкция по эксплуатации

Страница: 96 / 152

GSC53N - GSC57 - ZG47
EN - 94
8.6.2.1. PEAK ENERGY DEMAND
In three-phase system selecting the POWER mode and pressing F1 key 3 times you can
reach the “Peak Demand” mode.
The “
Peak Demand ” screen shows the Max Average value of Active Power (and the
corresponding Energy) measured during the last (or running) recording. The Average
value is evaluated in the Integration Period set for the recording. This screen also shows
the corresponding Active Energy and the corresponding Peak Date and Time.
27.09.00 17:35:12
PEAK DEMAND
THREE PHASE
Ead = 98.36 kWh
Pd = 24.59 kW
Peak Date
25.09.00 17:00
Int Period: 15min
Rec n: 06
ChgP PG- PG+
Example of “PEAK ENERGY DEMAND” screen
 F1 : to display the previous or the following screen. On the basis of the
settings made as per paragraph 8.1 following screens are displayed
cyclically:
 Three-phase 3 wires: total three-phase values, Wattmeter phases 1-2 and 2-3 values, Peak Demand

Three-phase 4 wires: total three-phase values, phase1, phase2 and phase3 values, Peak Demand
 F3/F4 : to pass to previous/next function respectively.
 SAVE : to save in the instrument memory a record of “Smp” type (see
paragraph 9.2) and the instantaneous values of voltage and current
present on the instrument inputs. This function is disabled during a
recording.

ENTER/HOLD : to enable/disable the HOLD function (updating interruption) of the
displayed data. All the previous functions remain however available.
When the HOLD function is enabled, the word
HOLD is displayed.
When this function is enabled it’s not possible to record or take an
energy measurement. This function is disabled during a recording or
an energy measurement.
 MENU : to enter in the MENU mode and change the instrument settings (see
paragraph 8.1 and 8.2). It’s not possible to enter the configuration
MENU during a recording or an energy measurement.
 START/STOP : to record selected parameters according to the instrument’s settings
(see chapter 10).