• Are all available hosts already assigned to other access groups?
Each host can only be assigned to one group. If necessary, click
Back
twice and then remove the
host from another access group.
• Is the host configured in the same zone controlled by the FC switch?
Secure Manager creates access groups as a refinement of zones configured by the FC switch. If
you are using FC switch zoning, the host and library must already be in the same zone.
• Is the host not physically connected to into the SAN?
If not, connect the host to the SAN or create a host in the wizard to be connected into the SAN
later.
6.
Click
Finish
.
Changing the name of an access group when using Secure Manager
Procedure
1.
Navigate to the
Configuration > Secure Manager
screen.
2.
Click
Edit
next to
Access Group Configuration and Host(s) selection
and then click
Next
.
3.
Select the group from the list of
Existing Groups
, click
Change Access Group Name
, and then click
Next
.
4.
Enter the new group name and then click
Finish
.
Deleting an access group when using Secure Manager
Procedure
1.
Navigate to the
Configuration > Secure Manager
screen.
2.
Click
Edit
next to
Access Group Configuration and Host(s) selection
and then click
Next
.
3.
Select the group from the list of
Existing Groups
, click
Delete Host Access Group
, and then click
Finish
.
Adding a host to an access group when using Secure Manager
Procedure
1.
Navigate to the
Configuration > Secure Manager
screen.
2.
Click
Edit
next to
Access Group Configuration and Host(s) selection
and then click
Next
.
3.
Select the group from the list of
Existing Groups
, click
Add Host to Group
, and then click
Next
.
4.
Select one or more available hosts to add to the group and then click
Finish
.
If no hosts are listed, check the following:
Changing the name of an access group when using Secure Manager
95
