manualshive.com logo in svg

HP StoreEver MSL3040, Руководство пользователя и сервисное руководство

HP StoreEver MSL3040 - профессиональное устройство для хранения данных. Пользователи могут скачать бесплатно руководство пользователя и сервисное руководство с manualshive.com. Это руководство поможет вам правильно настроить и использовать ваше устройство, обеспечивая эффективную работу и долгий срок службы.

Поделиться
Скачать
background image

Operating the library

Library user interfaces

The library provides two user interfaces:

• Operator control panel (OCP)—With the OCP, you can monitor, configure, and control the library from

the front panel.

• Remote management interface (RMI)—With the RMI, you can monitor, configure, and control the

library from a web browser. The RMI hosts a dedicated, protected internet site that displays a
graphical representation of the library.

The MSL3040 RMI

Before using the RMI, you must configure the library network settings and set the initial
administrator RMI password with the OCP.

 You can configure the network settings and set the initial

administrator RMI password with the Initial Configuration Wizard.

Use the initial administrator RMI password to log in to the RMI the first time. The library will prompt you to
set an actual RMI password.

The security user password can be set once by the administrator from the 

Configuration > User

Accounts

 screen.

To start the RMI, open a supported HTML browser and enter the IP address of the library in the browser
address bar.

Status icons

The green 

Status OK

 icon indicates that the library is fully operational and that no user

interaction is required.

The blue exclamation point 

Status Warning

 icon indicates that user attention is necessary, but

that the device can still perform most operations.

The red X 

Status Error

 icon indicates that user intervention is required and that the device is

not capable of performing some operations.

The MSL3040 OCP

The OCP has a power button, four navigational buttons, an enter button, a back button, an LCD screen,
and five LEDs. With the OCP you can monitor, configure, and operate most library functions from the
library front panel. To navigate the OCP, use the navigational, enter, and back buttons.

To power on the library, press the power button. To power off the library, press the power button for 5
seconds and then release it. When prompted, select the parking position for the robotic assembly.

Robotic assembly parking positions

•

The default parked position 

— This option is applicable in most cases and best for all service

options. With this option, the robotic assembly returns to its home position behind the OCP.

Operating the library

47

Содержание StoreEver MSL3040





















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для StoreEver MSL3040

NEC S2500 User Manual preview
S2500
Бренд: NEC Страницы: 106
G-Technology G-RAID Studio User Manual preview
G-RAID Studio
Бренд: G-Technology Страницы: 51
IAC INDUSTRIES QS-930 Assembly Instructions Manual preview
QS-930
Бренд: IAC INDUSTRIES Страницы: 8
QNAP TVS-h 74t Series User Manual preview
TVS-h 74t Series
Бренд: QNAP Страницы: 71
Glyph GT103800-1000 Manual preview
GT103800-1000
Бренд: Glyph Страницы: 7
Husky H4TR1 Use And Care Manual preview
H4TR1
Бренд: Husky Страницы: 7
Microdia MMCPLUS Operating Manual preview
MMCPLUS
Бренд: Microdia Страницы: 1
Acard ARS-2212 User Manual preview
ARS-2212
Бренд: Acard Страницы: 43
Infortrend EonStor GS 3000 Series Hardware Manual preview
EonStor GS 3000 Series
Бренд: Infortrend Страницы: 134
HP ProLiant DL100 G2 DPSS Administration Manual preview
ProLiant DL100 G2 DPSS
Бренд: HP Страницы: 155
HP NetStorage 6000 User Manual preview
NetStorage 6000
Бренд: HP Страницы: 192
HP ProLiant DL100 G2 DPSS Installation Manual preview
ProLiant DL100 G2 DPSS
Бренд: HP Страницы: 44
SATA 95121 Quick Start Manual preview
95121
Бренд: SATA Страницы: 8
EDSLab WiDRIVE User Manual preview
WiDRIVE
Бренд: EDSLab Страницы: 24
Broadcom BroadNAS User Manual preview
BroadNAS
Бренд: Broadcom Страницы: 24
TrailFX 160481 Manual preview
160481
Бренд: TrailFX Страницы: 5
Clarke Metalworker CBGS2 Assembly Instructions preview
Metalworker CBGS2
Бренд: Clarke Страницы: 4
Clarke CWB80B Assembly Instructions Manual preview
CWB80B
Бренд: Clarke Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды