1.
Orientation for a square-hole rack. The face with square inserts is installed into the square
rack holes.
2.
Orientation for a round-hole rack. The face with the round inserts is placed against the rack
posts.
b.
Align the adapter block in the bottom 2U of the 3U volume that the module will occupy, as shown in
the illustration.
1
2
c.
Secure the adapter block with a Phillips screw from the accessory kit.
3.
From the rear of the rack, mount an adapter block at the same height as each corresponding front
adapter block.
4.
From the front of the rack, starting at the rear adapter, mount the LHS rack shelf for each module into
the adapter blocks on the left side of the rack.
3
1
2
Installing the library
33
