f. Mailer Name
—Name of the sender of the e-mail.
g. Email Subject
—Subject line for the e-mail message.
h. Email Address
—Return address to use for the e-mail message.
i. Authentication Required
—When selected, a username and password are required to access the
SMTP server.
j. Username
—User account for logging in to the SMTP server when authentication is required.
k. Password
—Password associated with the Username when authentication is required.
5.
Click
Submit
.
Enabling SMTP
The library must have network access to an SMTP server.
Procedure
1.
Navigate to the
Configuration > Network Management > SMTP
screen.
2.
Click
SMTP Enabled
.
Configuring tape drives
Procedure
1.
Navigate to the
Configuration > Drives > Settings
screen.
2.
Modify any of the configurable values.
• Drive number—Drives are numbered from the bottom of the library up beginning with one. The
drive currently hosting the SCSI communication for the library is designated with
(LUN)
.
• Serial number—The serial number assigned to the tape drive by the library. This serial number is
reported to host applications. The serial number cannot be modified.
When a drive is replaced, the library reassigns the serial number and WWN from the drive that was
removed to the drive that is installed. The reassigned the values are based on the new location
within the library.
This serial number is not the serial number assigned to the drive by the manufacturer; the serial
number assigned by the manufacturer is shown in
Manufacturer S/N
.
• LTO generation
◦ LTO 6–Ultrium 6250
◦ LTO 7–Ultrium 15000
◦ LTO 8–Ultrium 30750
Enabling SMTP
67
