manualshive.com logo in svg

HP StoreEver MSL3040, Руководство пользователя и сервисное руководство

Поделиться
Скачать
HP StoreEver MSL3040 Скачать руководство пользователя страница 166

1.

Navigate to the 

Maintenance > Download Support Ticket

 screen.

2.

Click 

Download

.

• Download the support ticket from the OCP.

1.

Insert a FAT-32 formatted USB flash drive into a USB port.

2.

Select 

Maintenance > Download support ticket

.

3.

Under the 

Library Support Ticket

 drop-down, select 

Save

.

4.

Once the ticket is saved, remove the USB device.

Viewing a support ticket with L&TT

Prerequisites

• L&TT is installed on the local computer.

• The support ticket has been downloaded to the local computer.

Procedure

1.

From the L&TT 

File

 menu, select 

Load Support Ticket

.

2.

Select the support ticket file in the browser.

Finding event information

You can find error codes by viewing log files from the 

Maintenance > Logs and Traces > View Logs

screen or downloading support tickets from the 

Maintenance > Download Support Ticket

 screen.

Fibre Channel connection problems

Use the 

Status > Drive Status

 screen to check the link connection for your tape drive.

If the screen shows Logged Out:

• Verify that the correct Fibre speed is selected or is set to Automatic. If you are unsure of the speed of

the HBA or switch that the drive is connected to, try Automatic.

• Check that the correct port type is selected. Loop requires additional configuration. If you are unsure of

the correct port type, try Automatic.

If the screen shows No Link, the Speed Status is – and the Link LED on the back of the drive is off:

• The speed is probably set incorrectly. Try setting the speed to Automatic.

• If there are still issues, change the port type to Auto Detect.

If the screen shows No Light:

166

 Viewing a support ticket with L&TT

Содержание StoreEver MSL3040





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды