manualshive.com logo in svg

HP StorageWorks 2000fc, Справочное руководство

Поделиться
Скачать
HP StorageWorks 2000fc Скачать руководство пользователя страница 126

126

HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008

■

Volume is presented to all hosts not explicitly mapped – Specifies whether the 
volume is visible to all connected hosts. If the value is Yes, the LUN is also 
shown.

■

Volume Serial Number – Serial number of the volume being created.

■

Source Volume Name – Name of the volume being copied.

■

Percent Complete – Percent complete of the volume copy.

■

Volume Copy Status – Indicates whether the destination volume is Unavailable or 
Suspended.

■

Status Reason – The status is Unavailable while the volume-copy operation is in 
progress. The status is Suspended if the source volume goes offline while the 
copy is in progress. When the source volume comes back online, the copy 
process resumes from the point where it stopped.

Canceling a Volume Copy

You can cancel an in-progress volume-copy operation. When the cancellation is 
complete, the destination volume is deleted.

To cancel an in-progress volume copy:

1. Select Manage > Volume Management > Volume-Copy Services > Abort Volume-

Copy.

For each virtual disk, the virtual disk panel shows a status icon; the name, RAID 
level, size, number of disk drives, and number of volumes; and utility status, if any.

2. Select either the source volume’s virtual disk or the destination volume’s virtual 

disk.

The selected virtual disk’s volume names, sizes, and types are displayed, and the 
amount of free space. The destination volume’s type is Standard*.

3. Select either the source volume or the destination volume.

4. Click Abort Volume Copy.

A confirmation prompt is displayed.

5. Click OK to confirm the operation or Cancel to stop it.

If you clicked OK, a message indicates whether the operation succeeded. If it 
succeeded, the destination volume is removed from the Volume Menu panel.

Содержание StorageWorks 2000fc











































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды