SROS Command Line Interface Reference Guide
Enable Mode Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
190
show hosts [verbose]
Use the
show hosts
command to display information such as the domain name, name lookup service, a list
of name server hosts, and the cached list of host names and addresses on the network to which you can
connect.
Syntax Description
verbose
Enables detailed messaging.
Default Values
No default value necessary for this command.
Functional Notes
The list below describes the fields contained in the host table:
•
Flags: Indicate whether the entry is permanent (P) or temporary (T) and if the entry is OK or expired
(EXP).
•
Age: Indicates the age of the entry.
•
Type: Shows the protocol type.
•
Address: Displays the IP address for the entry.
Usage Examples
The following example is sample output from the
show hosts
command:
ProCurve>
enable
ProCurve#
show hosts
Name/address lookup uses domain name service
DNS Proxy is disabled
Default domain is not set
Name servers are 1.1.1.1 2.2.2.2
Host
Flags
Age
Type
Address
Example1
(P OK)
- -
IP
1.1.1.1
Example2
(P OK)
- -
IP
2.2.2.2
Содержание ProCurve Secure 7102dl
Страница 2: ......
Страница 3: ...SROS Command Line Interface Reference Guide Software Version J 08 03 September 2007 61195880L1 35H ...
Страница 1454: ......