SROS Command Line Interface Reference Guide
Enable Mode Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
184
show file
Use the
show file
command to display a specified file (located in either compact flash or flash memory) to
the terminal screen. Variations of this command include:
show file cflash
<filename>
show file cflash
<filename>
checksum
show file flash
<filename>
show file flash
<filename>
checksum
Syntax Description
cflash
Specifies a file located in compact flash memory.
flash
Specifies a file located in flash memory.
<filename>
Specify the filename of the file located in the specified memory location. Wildcard
entries (such as *.biz) are not valid for the
show file
command.
checksum
Optional. Displays the Message Digest 5 (MD5) checksum of the specified file.
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample
show file cflash
output:
ProCurve>
enable
ProCurve#
show file cflash startup-config
Using 2354 bytes
!
hostname "HP_West"
enable password password
!
ip subnet-zero
ip classless
ip routing
!
event-history on
no logging forwarding
no logging email
logging email priority-level info
!
username "admin" password "password"
!
no ip firewall alg h323
--MORE-
Содержание ProCurve Secure 7102dl
Страница 2: ......
Страница 3: ...SROS Command Line Interface Reference Guide Software Version J 08 03 September 2007 61195880L1 35H ...
Страница 1454: ......