HP ProCurve 4108gl Bundle, Руководство по управлению и настройке

Страница: 449 / 483

A-7
File Transfers
Downloading an Operating System (OS)
File
T
ra
n
sfe
rs
■
The terminal emulator you are using includes the Xmodem binary transfer
feature. (For example, in the HyperTerminal application included with
Windows NT, you would use the
Send File option in the Transfer dropdown
menu.)
Menu: Xmodem Download to Primary Flash
Note that the menu interface accesses only the primary flash.
1. From the console Main Menu, select
7. Download OS
2. Press
[E]
(for
Edit
).
3. Use the Space bar to select XMODEM in the Method field.
4. Press
[Enter]
, then
[X]
(for
eXecute
) to begin the OS download. The following
message then appears:
Press enter and then initiate Xmodem transfer
from the attached computer.....
5. Press [Enter] and then execute the terminal emulator command(s) to begin
Xmodem binary transfer. For example, using HyperTerminal:
a. Click on
Transfer
, then
Send File
.
b. Type the file path and name in the Filename field.
c. In the Protocol field, select
Xmodem
.
d. Click on the [Send] button.
The download will then commence. It can take several minutes, depend-
ing on the baud rate set in the switch and in your terminal emulator.
6. After the primary flash memory has been updated with the new operating
system, you must reboot the switch to implement the newly downloaded
OS. Return to the Main Menu and press
[6] (for Reboot Switch ). You will
then see this prompt:
Continue reboot of system? : No
Press the space bar once to change
No
to
Yes
, then press
[Enter]
to begin
the reboot.
7. To confirm that the operating system downloaded correctly:
a. From the Main Menu, select
1. Status and Counters
1. General System Information
b. Check the Firmware revision line.