HP NetServer AA 6200, Руководство администратора

Страница: 202 / 272

7-16 HP Netserver AA Solution Administrator’s Guide
MTCCONS (Endurance Manager Console Commands)
You can execute Endurance server commands from an MS-DOS window. The primary reason
for using MTCCONS (Endurance Manager console commands) is to execute scripts for system
validation (test) or system management.
When using MTCCONS, enter the command syntax and any required parameters.
Note: We recommend that you set your current directory to the Endurance area in
Program Files before using MTCCONS commands.
Each command has the following components: Prefix , Target , Verb , Operation type , Executed
from and any associated Parameters . For example:
To use MTCCONS commands, you must enter MTCCONS as the Prefix for every Endurance
console command. Depending on the command, the other fields vary from command to
command. Refer to the command descriptions in Chapter 5 for more information. The
MTCCONS parameters are described in Table 7-4 .
Table 7-4 MTCCONS Parameters
Parameter Description
-a Appends data to a file
-all Shows all data fields
-desc Prints a description of the command
-height Screen buffer height
-o Writes data to a file
-disable_safeguard Allows you to remove the only active CE or IOP from a configuration
-v Verbose displays output labels, values, and units
-width Screen buffer width
MTCCONS
Parameter Executed from Operation Type Verb* Target* Prefix
* Target and Verb are not order dependent. The command line syntax allows you to enter target ,
then verb , or vice versa.
CE1 Remove From Configuration From IOP2 -disable_safeguard