HP Compaq 6005 Pro MT, Руководство по обслуживанию и ремонту

Страница: 39 / 259

Option Description
from being used by the operating system and reduces the power used by the computer
in S5.
● Processor cache (enable/disable).
●
Multi-Processor (enable/disable). This option may be used to disable multi-processor support
under the OS.
● Integrated Graphics Memory Size (Automatic, 32M, 64M, 128M, 256M). This allows the user
to control the size of the memory used by the integrated graphics controller. Automatic allows
the BIOS to choose the optimal size. Available sizes may be limited by the installed system
memory.
●
Integrated Video (enable/disable). Allows you to use integrated video and PCI Up Solution
video at the same time (available on some models only).
NOTE: After Integrated Video is enabled and changes saved, a new menu item appears
under Advanced to allow you to select the primary VGA controller video device.
● Internal speaker (some models) (enable/disable) (does not affect external speakers)
● NIC PXE Option ROM Download (enable/disable). The BIOS contains an embedded NIC option
ROM to allow the unit to boot through the network to a PXE server. This is typically used to
download a corporate image to a hard drive. The NIC option ROM takes up memory space
below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is
limited. This F10 option will allow users to disable the downloading of this embedded NIC option
ROM thus giving more DCH space for additional PCI cards which may need option ROM space.
The default will be to have the NIC option-ROM-enabled.
●
SATA RAID Option ROM Download (enable/disable). The BIOS contains an embedded SATA
RAID option ROM to for RAID support. This can be temporarily disabled to save DCH space.
Note that with the option ROM disabled, users will be unable to use boot to hard drives in the
system while running in RAID mode.
●
HPET (enable/disable). The HPET (high precision event timer) can be disabled in the event
that it causes a resource conflict in the OS.
●
PCIe x16 Slot. This option allows using the x16 PCIe slot in an 8-lane mode with the DispalyPort
connector on the motherboard or in a full 16-lane mode without DisplayPort.
Recovering the Configuration Settings
This method of recovery requires that you first perform the Save to Removable Media command with
the Computer Setup (F10) Utility before Restore is needed. (See Save to Removable Media
on page 16 in the Computer Setup—File table.)
NOTE: It is recommended that you save any modified computer configuration settings to a a USB
flash media device or a diskette-like device (a storage device set to emulate a diskette drive) and save
the device for possible future use.
To restore the configuration, insert the USB flash media device or other storage media emulating a
diskette with the saved configuration and perform the
Restore from Removable Media command with
the Computer Setup (F10) Utility. (See Restore from Removable Media on page 16 in the Computer
Setup—File table.)
Table 3-6 Computer Setup—Advanced (for advanced users) (continued)
Recovering the Configuration Settings 27