background image

central file store. SSM then automatically updates any down-revision system software on the networked
PCs to the later levels available in the file store. Since SSM only allows distribution of SoftPaq updates
to the correct client system models, administrators can confidently and efficiently use SSM to keep
system software updated.

System Software Manager integrates with enterprise software distribution tools such as HP Client
Automation solutions, HP Client Manager from Symantec, and Microsoft Systems Management Server
(SMS). Using SSM, you can distribute customer-created or third-party updates that have been packaged
in the SSM-format.

SSM may be downloaded at no charge by visiting 

http://www.hp.com/go/ssm

.

NOTE:

SSM does not currently support remote ROM flash on systems that have Windows BitLocker

Drive Encryption enabled and are using TPM measurements to protect the BitLocker keys because
flashing the BIOS would invalidate the trust signature that BitLocker created for the platform. Disable
BitLocker via Group Policy in order to flash the system BIOS.

You can enable BitLocker support without TPM measurements of BIOS to avoid invalidating the
BitLocker keys. HP recommends you keep a secure backup of the BitLocker credentials in case of
recovery emergencies.

HP ProtectTools Security Manager

HP ProtectTools security software provides security features that help protect against unauthorized
access to the computer, networks, and critical data. Enhanced security functionality is provided by the
following software modules, and is accessible through HP ProtectTools Security Manager:

HP ProtectTools Security Manager is the single console through which all other modules are accessed.

Credential Manager for HP ProtectTools

Drive Encryption for HP ProtectTools

Privacy Manager for HP ProtectTools

File Sanitizer for HP ProtectTools

Java Card Security for HP ProtectTools

Embedded Security for HP ProtectTools

Device Access Manager for HP ProtectTools

LoJack Pro for HP ProtectTools

HP ProtectTools provides two versions that can be utilized: HP ProtectTools Security Manager and HP
ProtectTools Administrative Console. Both Administrator and user versions are available in the 

Start

All Programs

 menu.

The software modules available for your computer may vary depending on your model. For example,
Embedded Security for HP ProtectTools is available only for computers on which the Trusted Platform
Module (TPM) embedded security chip is installed.

HP ProtectTools software modules may be preinstalled, preloaded, or available for download from the
HP Web site. For select HP Pro Desktops, HP ProtectTools is available as an after market option.
Visit 

http://www.hp.com/products/security

 for more information.

Software Updating and Management

37

Содержание Compaq 6005 Pro MT




































































































































































































































































Отзывы: