HP BCDVideo BCD108 Скачать руководство пользователя страница 132 | Manualshive

Страница: 132 / 162

background image

Software and configuration utilities 132

9.

Reboot the server. A reboot is required after the firmware update for the updates to take effect and
for hardware stability to be maintained.

Online Flash components

This component provides updated system firmware that can be installed directly on supported operating
systems. Additionally, when used in conjunction with SUM ("

Smart Update Manager

" on page

), this

Smart Component allows the user to update firmware on remote servers from a central location. This
remote deployment capability eliminates the need for the user to be physically present at the server to
perform a firmware update.

Drivers

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The server includes new hardware that may not have driver support on all OS installation media.

If you are installing an Intelligent Provisioning-supported OS, use Intelligent Provisioning (on page

and its Configure and Install feature to install the OS and latest supported drivers.

If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are
required. These drivers, as well as other option drivers, ROM images, and value-add software can be
downloaded as part of an SPP.

If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server
supports. To verify that your server is using the latest supported version and for more information about
SPP, see the Hewlett Packard Enterprise website (

http://www.hpe.com/servers/spp/download

To locate the drivers for a particular server, go to the Hewlett Packard Enterprise Support Center website
(

http://www.hpe.com/support/hpesc

). Under

Select your HPE product

, enter the product name or

number and click

Go

.

Software and firmware

Update software and firmware before using the server for the first time, unless any installed software or
components require an older version.

For system software and firmware updates, use one of the following sources:

•

Download the SPP ("

Service Pack for ProLiant

" on page

) from the Hewlett Packard Enterprise

website (

http://www.hpe.com/servers/spp/download

•

Download individual drivers, firmware, or other systems software components from the server

product page in the Hewlett Packard Enterprise Support Center website
(

http://www.hpe.com/support/hpesc

Operating System Version Support

For information about specific versions of a supported operating system, refer to the operating system
support matrix (

http://www.hpe.com/info/ossupport

Version control

The VCRM and VCA are web-enabled Insight Management Agents tools that SIM uses to schedule
software update tasks to the entire enterprise.

•

VCRM manages the repository for SPP. Administrators can do the following:

o

View the SPP contents

«
...
130
131
132
133
134
...
»

Содержание BCDVideo BCD108



































































































































































Отзывы:

Нет отзывов

Похожие инструкции для BCDVideo BCD108

Бренд: D-Link Страницы: 12

Бренд: Basalte Страницы: 2

Бренд: Wyse Страницы: 6

Бренд: Avaya Страницы: 19

Бренд: KYLAND Страницы: 30

Бренд: B&B Electronics Страницы: 2

Бренд: ACE COMPUTERS Страницы: 32

Бренд: MSI Страницы: 18

Бренд: NASdeluxe Страницы: 6

HAM RADIO DELUXE

Бренд: Kenwood Страницы: 16

ProLiant Moonshot

Бренд: HP Страницы: 21

Бренд: Planet Страницы: 74

Бренд: Bosanova Страницы: 2

Бренд: Bosanova Страницы: 2

Бренд: Bosanova Страницы: 2

DIRECTORY SERVER 8.0

Бренд: Red Hat Страницы: 128

Бренд: Certon Страницы: 29

Бренд: IBM Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды