HP BCDVideo BCD108, Руководство пользователя

Страница: 109 / 162

Hardware options installation 109
6.
Install the TPM board. Press down on the connector to seat the board (" System board components "
on page 14 ).
7.
Install the TPM security rivet by pressing the rivet firmly into the system board.
8.
Install the PCI riser cage (on page 24 ).
9.
Install the access panel (on page 22 ).
10.
Install the server into the rack.
11.
Power up the server (" Powering up the server " on page 21 ).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker detects a possible compromise of
system integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
•
Always store the recovery key/password in multiple locations.
•
Always store copies of the recovery key/password away from the server.