HP A7533A - Brocade 4Gb SAN Switch Base, Руководство администратора

Страница: 453 / 576

Fabric OS 6.2 administrator guide 449
trunking groups are based on the user port number, with contiguous eight ports as one group, such as 0–7,
8–15, 16–23 and up to the number of ports on the switch (see Figure 77 ).
Figure 77 Trunk group configuration for the HP StorageWorks 8/40 SAN Switch
1. Connect to the switch and log in using an account assigned to the admin role.
2. Ensure that both modules (edge switch and the switch running in AG mode) have the trunking licenses
enabled.
3. Ensure that the ports have trunking enabled by issuing the
portCfgShow
command. If Trunking is not
enabled, enter the
portCfgTrunkPort <port>, 1
command.
4. Ensure ports will become the same speed within the trunk.
5. Ensure edge switch F_Port trunk ports are connected within the ASIC-supported trunk group on the AG
switch.
6. Ensure that both modules are running the same Fabric OS versions.
7. Configure the trunk on the edge switch by assigning the Trunk Area (TA) using the ” Assigning a Trunk
Area ” procedure.
8. Enable F_Port trunking.
Assigning a Trunk Area
You must enable trunking on all ports to be included in a Trunk Area before you can create a Trunk Area.
Use the
portCfgTrunkPort
or
switchCfgTrunk
command to enable trunking on a port or on all
ports of a switch.
Enter the
portTrunkArea
command to assign a static TA on a port or port trunk group, to remove a TA
from a port or group of ports in a trunk, and to display masterless F_Port trunking information.
For more information on the
portTrunkArea
command, enter
help portTrunkArea
or see the Fabric
OS Command Reference. F_Port trunking will not support shared area ports 16-47 on the HP
StorageWorks SAN Director 48 Port 4Gb FC blade.
Table 89 shows an example of the address identifier.
The following example shows how to assign a TA on an enterprise-class platform including ports 13 and 14
on slot 10 with a port index of 125:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Disable the ports to be included in the TA.
3. Enable the TA for ports 13 and 14 on slot 10 with a port index of 125:
switch:admin> porttrunkarea --enable 10/13-14 -index 125
Trunk index 125 enabled for ports 10/13 and 10/14.
Table 89 Address identifier
2
3
2
2
2
1
2
0
1
9
1
8
1
7
1
6
1
5
14 1
3
1
2
1
1
1
0
9 8 7 6 5 4 3 2 1 0
Domain ID Area_ID Port ID
Address Identifier