manualshive.com logo in svg

HP A7533A - Brocade 4Gb SAN Switch Base, Руководство администратора

HP A7533A - Brocade 4Gb SAN Switch Base - это высокопроизводительный коммутатор для хранения данных в корпоративных сетях. Администраторы могут загрузить бесплатное Руководство Администратора на manualshive.com, чтобы получить подробные инструкции по настройке и управлению этим устройством. Надежное решение для вашей инфраструктуры хранения данных.

Поделиться
Скачать
background image

144 Configuring advanced security features

The following example shows how to set a strict SCC and tolerant DCC fabric-wide consistency policy.

switch:admin> 

fddcfg --fabwideset "SCC:S;DCC"

switch:admin> 

fddcfg --showall

Local Switch Configuration for all Databases:-

     DATABASE  -  Accept/Reject

---------------------------------

          SCC  -         accept

          DCC  -         accept

          PWD  -         accept

          FCS  -         accept

         AUTH  -         accept

     IPFILTER  -         accept

Fabric Wide Consistency Policy:- "SCC:S;DCC"

Notes on joining a switch to the fabric

When a switch is joined to a fabric with a tolerant SCC or DCC fabric-wide consistency policy, the joining 

switch must have a matching tolerant SCC or DCC fabric-wide consistency policy. If the tolerant SCC or 

DCC fabric-wide consistency policies do not match, the switch can join the fabric, but an error message 

flags the mismatch. If the tolerant SCC and DCC fabric-wide consistency policies match, the corresponding 

SCC and DCC ACL policies are compared. 
The enforcement of fabric-wide consistency policy involves comparison of the Active policy set only. If the 

ACL policies match, the switch joins the fabric successfully. If the ACL policies are absent on the switch or 

on the fabric, the switch joins the fabric successfully, and the ACL policies are copied automatically from 

where they exist to where they are absent. The Active policies set where they exist and overwrite the Active 

and Defined policies where they are absent. If the ACL policies do not match, the switch can join the fabric, 

but an error message flags the mismatch. 
Under both conflicting conditions, 

secPolicyActivate

 is blocked in the merged fabric. Use the 

fddCfg

--

fabwideset

 command to resolve the fabric-wide consistency policy conflicts. Use the 

distribute

 command to explicitly resolve conflicting ACL policies.

When a switch is joined to a fabric with a strict SCC or DCC fabric-wide consistency policy, the joining 

switch must have a matching fabric-wide consistency policy. If the strict SCC or DCC fabric-wide 

consistency policies do not match, the switch cannot join the fabric and the neighboring E_Ports are 

disabled. If the strict SCC and DCC fabric-wide consistency policies match, the corresponding SCC and 

DCC ACL policies are compared. 
The enforcement of a fabric-wide consistency policy involves comparison with the Active policy set only. If 

the ACL polices match, the switch joins the fabric successfully. If the ACL policies are absent either on the 

switch or on the fabric, the switch joins the fabric successfully, and the ACL policies are copied 

automatically from where they are present to where they were absent. The Active policy set where it is 

present overwrites the Active and Defined policy set where it is absent. If the ACL policies do not match, the 

switch cannot join the fabric and the neighboring E_Ports are disabled. 
Use the 

fddCfg 

–-

fabwideset

 command on either this switch or the fabric to set a matching strict SCC 

or DCC fabric-wide consistency policy. Use ACL policy commands to delete a conflicting ACL policy from 

one side to resolve an ACL policy conflict. If neither the fabric nor the joining switch is configured with a 

fabric-wide consistency policy, there are no ACL merge checks required.
The descriptions above also apply to joining two fabrics. In this context, the joining switch becomes a 

joining fabric.

Matching fabric-wide consistency policies

This section describes the interaction between the databases with active SCC and DCC policies and 

combinations of fabric-wide consistency policy settings when fabrics are merged.
For example: Fabric A with SCC:S;DCC (strict SCC and tolerant DCC) joins Fabric B with SCC:S;DCC 

(strict SCC and tolerant DCC), the fabrics can merge as long as the SCC policies match (both are strict). 

Содержание A7533A - Brocade 4Gb SAN Switch Base

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для A7533A - Brocade 4Gb SAN Switch Base

Conrad 62 27 13 Operating Instructions preview
62 27 13
Бренд: Conrad Страницы: 4
Alps Electric miniSD SCHF Series Specification Sheet preview
miniSD SCHF Series
Бренд: Alps Electric Страницы: 2
Conrad 97 37 86 Operating Instructions preview
97 37 86
Бренд: Conrad Страницы: 4
Macherey-Nagel 162735 Instructions For Installation Manual preview
162735
Бренд: Macherey-Nagel Страницы: 21
StarTech.com ST1000SPEXDP Instruction Manual preview
ST1000SPEXDP
Бренд: StarTech.com Страницы: 9
LOOP Electronics LE-TA02 User Manual preview
LE-TA02
Бренд: LOOP Electronics Страницы: 4
Air Live SKY-211 Quick Setup Manual preview
SKY-211
Бренд: Air Live Страницы: 50
Belkin USB/SCSI Adapter F5U115-UNV Installation Instructions preview
USB/SCSI Adapter F5U115-UNV
Бренд: Belkin Страницы: 2
IT Works CPL500W User Manual preview
CPL500W
Бренд: IT Works Страницы: 105
NGS W-70W Automatic Manual preview
W-70W Automatic
Бренд: NGS Страницы: 40
König CMP-WIFIFIND10 Quick Installation Manual preview
CMP-WIFIFIND10
Бренд: König Страницы: 12
3idee XR3501 Assembly Instructions Manual preview
XR3501
Бренд: 3idee Страницы: 8
Acard AEC-6710S User Manual preview
AEC-6710S
Бренд: Acard Страницы: 26
Philips SWV7562W Specifications preview
SWV7562W
Бренд: Philips Страницы: 2
US Robotics WN4501D User Manual preview
WN4501D
Бренд: US Robotics Страницы: 41
urmet domus 1083 Manual preview
1083
Бренд: urmet domus Страницы: 8
Radio Shack 2730885 User Manual preview
2730885
Бренд: Radio Shack Страницы: 8
3e Technologies International 3e-250 User Manual preview
3e-250
Бренд: 3e Technologies International Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды