manualshive.com logo in svg

HP A7533A - Brocade 4Gb SAN Switch Base, Руководство администратора

HP A7533A - Brocade 4Gb SAN Switch Base - это высокопроизводительный коммутатор для хранения данных в корпоративных сетях. Администраторы могут загрузить бесплатное Руководство Администратора на manualshive.com, чтобы получить подробные инструкции по настройке и управлению этим устройством. Надежное решение для вашей инфраструктуры хранения данных.

Поделиться
Скачать
background image

Fabric OS 6.2 administrator guide 401

See the 

Fabric OS Command Reference

 for details about the 

fcrResourceShow

 

command.

FC-FC routing and Virtual Fabrics

If Virtual Fabrics is not enabled, FC-FC routing behavior is unchanged. If Virtual Fabrics is enabled, in the 

FC-FC routing context, a base switch is like a backbone switch and a base fabric is like a backbone fabric.
If Virtual Fabrics is enabled, the following rules apply:

•

EX_Ports and VEX_Ports can be configured only on the base switch.
When you enable Virtual Fabrics, the chassis is automatically rebooted. When the switch comes up, 

only one default Logical Switch is present, with the default FID of 128. All previously configured 

EX_Ports and VEX_Ports are persistently disabled with the reason 

ExPort in non base switch

. 

You must explicitly create a base switch and move the EX_ and VEX_Ports to the base switch. The ports 

are then automatically enabled.
If you move existing EX_ or VEX_Ports to any Logical Switch other than the base switch, these ports are 

automatically disabled.
If you want to change an EX_ or VEX_Port on the Logical Switch to be a non-EX or VEX_Port, you must 

use the 

portCfgDefault

 command. You cannot use the 

portCfgExPort

 command because that 

command is allowed only on the base switch.

•

EX_Ports can connect to a Logical Switch that is in the same chassis or a different chassis. However, the 

FID of the EX_Port must be set to a different value than the FID of the Logical Switch to which it connects. 

That is, the EX_Port and the Logical Switch to which it connects must be in different fabrics.

•

EX_Ports and VEX_Ports (those in FC routers and those in a base switch) cannot connect to any edge 

fabric with Logical Switches configured to use XISLs.
If you connect an EX_Port or VEX_Port to an edge fabric, you must ensure that there are no Logical 

Switches with XISL use enabled in that edge fabric. If any Logical Switch in the edge fabric allows XISL 

use, the EX_Port or VEX_Port is disabled. See ”

Configuring a Logical Switch for XISL use

” on page 187 

for instructions on disallowing XISL use.
Since XISL use is disallowed, dedicated links must be configured to route traffic across fabrics, as shown 

in 

Figure 14

 on page 177.

IMPORTANT:

If you connect an EX_Port or VEX_Port from an FC router running Fabric OS 6.1.x or earlier 

to a Logical Switch that allows XISL use, the EX_Port or VEX_Port is not disabled; however, this configuration 

is not supported and you should avoid it.

•

Backbone-to-edge routing is not supported in the base switch. See ”

Backbone-to-edge routing with 

Virtual Fabrics

” on page 402 for information about how to configure FC routers to allow 

backbone-to-edge routing with Virtual Fabrics.

•

If you connect an FC router in legacy mode to a base switch, you must set the backbone FID of the FC 

router to be the same as that of the base switch. 

•

All FCR commands can be executed only in the base switch context.

•

The 

fcrConfigure

 command is not allowed when Virtual Fabrics is enabled. Instead, use the 

lsCfg

 

command to configure the FID.

Logical Switch configuration for FC routing

For example, 

Figure 68

 on page 402 shows two chassis partitioned into Logical Switches. This 

configuration allows the device in Fabric 128 to communicate with the device in Fabric 15 without merging 

the fabrics. Note the following:

•

The base switch in Physical chassis 1 serves as an FC router and contains EX_Ports that connect to 

Logical Switches in the two edge fabrics, Fabric 128 and Fabric 15. 

•

The Logical Switches in Fabric 128 and Fabric 15 are connected with physical ISLs, and do not use the 

XISL connection in the base fabric.

•

The Logical Switches in Fabric 1 are configured to allow XISL use. You cannot connect an EX_Port to 

these Logical Switches, so the device in Fabric 2 cannot communicate with the other two devices.

Содержание A7533A - Brocade 4Gb SAN Switch Base

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для A7533A - Brocade 4Gb SAN Switch Base

D-Link DWL-AG132 Install Manual preview
DWL-AG132
Бренд: D-Link Страницы: 18
D-Link DWL-G820 - AirPlus Xtreme G Install Manual preview
DWL-G820 - AirPlus Xtreme G
Бренд: D-Link Страницы: 16
D-Link DWA-582 Quick Install Manual preview
DWA-582
Бренд: D-Link Страницы: 16
D-Link DWL-122 Manual preview
DWL-122
Бренд: D-Link Страницы: 46
D-Link DWA-643 Quick Installation Manual preview
DWA-643
Бренд: D-Link Страницы: 24
Airlink101 AWLL4030 Quick Installation Manual preview
AWLL4030
Бренд: Airlink101 Страницы: 4
I-Gard DSP-CA Instruction Manual preview
DSP-CA
Бренд: I-Gard Страницы: 9
Mini Gadgets BB2Outlet User Manual preview
BB2Outlet
Бренд: Mini Gadgets Страницы: 12
Tekram Technology DC-310 series Quick Reference Manual preview
DC-310 series
Бренд: Tekram Technology Страницы: 4
AMEC NK-80 Quick Start Manual preview
NK-80
Бренд: AMEC Страницы: 4
Planet WNL-U553 Quick Installation Manual preview
WNL-U553
Бренд: Planet Страницы: 2
Ableconn USB3DP00B User Manual preview
USB3DP00B
Бренд: Ableconn Страницы: 34
e+p HDMS 31 Instruction Manual preview
HDMS 31
Бренд: e+p Страницы: 2
Rosewill RNX-G300EX Quick Installation Manual preview
RNX-G300EX
Бренд: Rosewill Страницы: 12
AMS AS5601 Manual preview
AS5601
Бренд: AMS Страницы: 13
Supermicro AOC-A100G-b2CM User Manual preview
AOC-A100G-b2CM
Бренд: Supermicro Страницы: 27
J-Three BU-2061-J Quick Installation Manual preview
BU-2061-J
Бренд: J-Three Страницы: 10
ZyXEL Communications ZyAIR G-220 User Manual preview
ZyAIR G-220
Бренд: ZyXEL Communications Страницы: 67

Бренды по названию

Популярные бренды

Загрузить еще бренды