HP A7533A - Brocade 4Gb SAN Switch Base Скачать руководство пользователя страница 199

Страница: 199 / 576

Fabric OS 6.2 administrator guide 197

NOTE:

If the switch domain ID changes, the

domain,index

members are invalid (they are not

automatically changed). You must then reconfigure the Admin Domain with the current

domain,index

members.

Switch members

Switch members are defined by the switch WWN or domain ID, and have the following properties:

•

Grants administrative control to the switch

•

Grants port control for all ports in that switch

•

Allows switch administrative operations such as disabling and enabling a switch, rebooting, and

firmware downloads

•

Does not provide zoning rights for the switch ports or devices

To allow devices to be zoned within Admin Domains, you must specify the port members using

domain,index

or device WWN members.

E_Ports (including VE_Ports, EX_Ports, and VEX_Ports) are implicitly shared across all Admin Domains. An

administrator can perform port control operations only if the

domain,index

of the E_Port is part of the

Admin Domain.

NOTE:

Only the WWN of the switch is saved in the Admin Domain. If you change the domain ID of the

switch, the Admin Domain ownership of the switch is not changed.

Admin Domains and switch WWN

Admin Domains are treated as fabrics. Because switches cannot belong to more than one fabric, switch

WWNs are converted so that they appear as unique entities in different Admin Domains (fabrics). This

WWN conversion is performed only in the AD1 through AD254 context. AD0 and AD255 use

unconverted switch WWNs.
The switch WWN has the following format:

10:00:

In an Admin Domain context, the switch WWN is converted from NAA=1 to NAA=5 format, with the

Admin Domain number added, using the following syntax:

where

is the Admin Domain number.

For example, if the switch WWN is:

10:00:00:60:69:e4:24:e0

then the converted WWN for that switch in AD1 would be:

50:06:06:9e:42:4e:09:01

Figure 23

shows an unfiltered view of a fabric with two switches, three devices, and two Admin Domains.

The devices are labeled with device WWNs and the switches are labeled with domain ID and switch

WWNs.

Содержание A7533A - Brocade 4Gb SAN Switch Base

































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание A7533A - Brocade 4Gb SAN Switch Base

Отзывы:

Похожие инструкции для A7533A - Brocade 4Gb SAN Switch Base

Бренды по названию

Популярные бренды

HP A7533A - Brocade 4Gb SAN Switch Base, Руководство администратора

Результаты поиска

Содержание A7533A - Brocade 4Gb SAN Switch Base

Отзывы:

Похожие инструкции для A7533A - Brocade 4Gb SAN Switch Base

Бренды по названию

Популярные бренды