HP A7533A - Brocade 4Gb SAN Switch Base, Руководство администратора

Страница: 123 / 576

Fabric OS 6.2 administrator guide 121
3. Activate the policy using the
secPolicyActivate
command.
If the command is not entered, the changes are lost when the session is logged out. For more
information about this command, see ” ACL policy modifications ” on page 126.
4. To distribute the policies, enter either the
distribute -p
policy_list
-d
switch_list command to either
send the policies to intended domains, or the
distribute -p
policy_list
-d
wild_card (*) command
to send the policies to all switches.
Creating an FCS policy
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter
secPolicyCreate “FCS_POLICY”, “ member ; ... ; member ”
.
where
member
indicates a switch that is eligible to become a primary or backup FCS switch.
Specify switches by WWN, domain ID, or switch name. Enter the wild card (*) character to indicate all
the switches in the fabric.
For example, to create an FCS policy that allows a switch with domain ID 2 to become a primary FCS
and domain ID 4 to become a backup FCS:
switch:admin> secpolicycreate "FCS_POLICY", "2;4"
FCS_POLICY has been created
3. To save or activate the new policy, enter either the
secPolicySave
or the
secPolicyActivate
command.
Once the policy has been activated you can distribute the policy.
NOTE: FCS policy must be consistent across the fabric. If the policy is inconsistent in the fabric, you will
not be able to perform any fabric-wide configurations from the primary FCS.
Modifying the order of FCS switches
1. Log in to the Primary FCS switch using an account assigned to the admin role.
2. Enter
secPolicyShow “Defined”, “FCS_POLICY”
This displays the WWNs of the current Primary FCS switch and backup FCS switches.
3. Enter
secPolicyFCSMove
and then provide the current position of the switch in the list and the
desired position at the prompts.
Alternatively, enter the
secPolicyFCSMove [ From, To ]
command.
From is the current position in the list of the FCS switch and To is the desired position in the list for this
switch.