manualshive.com logo in svg

HP A7533A - Brocade 4Gb SAN Switch Base, Руководство администратора

HP A7533A - Brocade 4Gb SAN Switch Base - это высокопроизводительный коммутатор для хранения данных в корпоративных сетях. Администраторы могут загрузить бесплатное Руководство Администратора на manualshive.com, чтобы получить подробные инструкции по настройке и управлению этим устройством. Надежное решение для вашей инфраструктуры хранения данных.

Поделиться
Скачать
background image

Fabric OS 6.2 administrator guide 213

8

Installing and maintaining firmware

Firmware download process overview

Fabric OS 6.2.0 provides nondisruptive firmware installation.
This chapter refers to the following specific types of blades inserted into either the HP StorageWorks 4/256 

SAN Director or HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 SAN Director 

Switch platforms:

•

FC blades or port blades contain only Fibre Channel ports: HP StorageWorks 4/256 SAN Director 16 

Port 4Gb Blade, HP StorageWorks 4/256 SAN Director 16 Port 4Gb Blade, HP StorageWorks SAN 

Director 48 Port 4Gb FC blade, HP StorageWorks SAN Director 6 Port 10Gb FC blade, and HP 

StorageWorks SAN Director 16 Port 8Gb FC blade, HP StorageWorks SAN Director 32 Port 8Gb FC 

blade, HP StorageWorks SAN Director 48 Port 8Gb FC blade.

•

AP blades contain extra processors and specialized ports: B-Series Multi-Protocol Router Blade and HP 

StorageWorks B-Series iSCSI Director Blade.

•

CP blades have a control processor (CP) used to control the entire switch; they can be inserted only into 

slots 5 and 6 on the HP StorageWorks 4/256 SAN Director, slots 6 and 7 on the HP StorageWorks DC 

SAN Backbone Director, and slots 4 and 5 on the HP StorageWorks DC04 SAN Director Switch.

•

CORE8 and CR4S-8 core blades provide ICL functionality between two HP StorageWorks DC SAN 

Backbone Directors: CORE8 blades can be inserted only into slots 5 and 8 on the HP StorageWorks 

DC SAN Backbone Director. CR4S-8 blades can be inserted only into slots 3 and 6 on the HP 

StorageWorks DC04 SAN Director Switch.

NOTE:

For more information on troubleshooting a firmware download, see the 

Fabric OS Troubleshooting 

and Diagnostics Guide

. 

You can download Fabric OS to a director, which is a chassis; and to a nonchassis-based system, also 

referred to as a switch. The difference in the download process is that directors have two CPs and 

nonchassis-based systems have one CP. Use the 

firmwareDownload

 command to download the 

firmware from either an FTP or SSH server by using either the FTP or SCP protocol to the switch. Or, on the 

HP StorageWorks 8/8 and 8/24 SAN Switches, HP StorageWorks 8/40 SAN Switch, HP StorageWorks 

8/80 SAN Switch and the HP StorageWorks DC SAN Backbone Director and HP StorageWorks DC04 

SAN Director you can use an HP StorageWorks B-Series 2G USB Drive (AK864A).
The new firmware consists of multiple files in the form of RPM packages listed in a 

.plist 

file. The 

.

plist

 file contains specific firmware information (time stamp, platform code, version, and so forth) and 

the names of packages of the firmware to be downloaded. These packages are made available 

periodically to add features or to remedy defects. Contact HP support to obtain information about 

available firmware versions.
All systems maintain two partitions of nonvolatile storage areas, a primary and a secondary, to store two 

firmware images. The firmware download process always loads the new image into the secondary 

partition. It then swaps the secondary partition to be the primary and High Availability (HA) reboots 

(non-disruptive) the system. After the system boots up, the new firmware is activated. The firmware 

download process then copies the new image from the primary partition to the secondary partition.
In dual-CP systems, the firmware download process, by default, sequentially upgrades the firmware image 

on both CPs using HA failover to prevent disruption to traffic flowing through the enterprise-class platform. 

This operation depends on HA status on the enterprise-class platform. If the platform does not support HA, 

you can still upgrade the CPs one at a time, using the 

firmwareDownload –s

 command. This command 

allows you to enable or disable 

autoreboot

, and 

autocommit

 modes, on switch and enterprise-class 

platforms. On enterprise-class platforms, the 

-s

 option enables you to upgrade a single CP. See the ”

Test 

and restore firmware on enterprise-class platforms

” on page 228.

Содержание A7533A - Brocade 4Gb SAN Switch Base

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для A7533A - Brocade 4Gb SAN Switch Base

D-Link DSB-650TX Quick Installation Manual preview
DSB-650TX
Бренд: D-Link Страницы: 10
D-Link DHP-P500AV Quick Start Manual preview
DHP-P500AV
Бренд: D-Link Страницы: 2
D-Link DU-520 Installation Manual preview
DU-520
Бренд: D-Link Страницы: 13
D-Link DBT-122 Setup Manual preview
DBT-122
Бренд: D-Link Страницы: 2
D-Link DFE-570TX Setup Manual preview
DFE-570TX
Бренд: D-Link Страницы: 19
D-Link D DPH-50U DPH-50U Quick User Manual preview
D DPH-50U DPH-50U
Бренд: D-Link Страницы: 43
D-Link DFE-550TX Quick Instruction Manual preview
DFE-550TX
Бренд: D-Link Страницы: 4
D-Link DGE-660TD Quick Install Manual preview
DGE-660TD
Бренд: D-Link Страницы: 12
D-Link DFE-528TX Quick Install Manual preview
DFE-528TX
Бренд: D-Link Страницы: 8
D-Link DGE-560SX Quick Start Manual preview
DGE-560SX
Бренд: D-Link Страницы: 4
D-Link DFE-538TX Quick Install Manual preview
DFE-538TX
Бренд: D-Link Страницы: 4
D-Link DFE-538TX Quick Instruction Manual preview
DFE-538TX
Бренд: D-Link Страницы: 5
D-Link DUB-E100 Installation Manual preview
DUB-E100
Бренд: D-Link Страницы: 8
D-Link DFE-690TXD Installation Manual preview
DFE-690TXD
Бренд: D-Link Страницы: 10
D-Link DHP-308AV Quick Install Manual preview
DHP-308AV
Бренд: D-Link Страницы: 2
Ableconn USB2E100W User Manual preview
USB2E100W
Бренд: Ableconn Страницы: 15
HTC Vive TC NE30W-EU Manual preview
Vive TC NE30W-EU
Бренд: HTC Страницы: 36
cable matters 202043 Quick Start Manual preview
202043
Бренд: cable matters Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды