horiba HU-200TB-W SS-120-W, Инструкция по эксплуатации

Страница: 44 / 109

Operation
32
rng.0
Zero point value setting for
transmission output 2.A
Specify the value at the zero point
(4 mA) of transmission output 2.A.
Note:
The item of sub display depends
on which ever “10.00”
*1
, “100.0”
*2
or “1000”
*3
in “C.rng” of Cur2.A is
selected.
Cur2.A
0.00 to
11.00, 0.0 to
110.0, 0 to
2200
0
45
Cur2.b/2.c 0.0
Cur2.d 0.00
rng.S
Span point value setting for
transmission output 2.A
Specify the value at the span point
(20 mA) of transmission output
2.A.
Note:
The item of sub display depends
on which ever “10.00”
*1
, “100.0”*2
or “1000”
*3
in “C.rng” of Cur2.A is
selected.
Cur2.A
0.00 to
11.00, 0.0 to
110.0, 0 to
2200
1000
45
Cur2.b 100.0
Cur2.c 50.0
Cur2.d 10.00
PrES
Transmission output 2.A
hold output value (preset)
setting
Input the preset value for current
holding.
Note:
This is displayed when “C.HoLd” is
set to “PrES” and the item of sub
display depends on which ever
“10.00”
*1
, “100.0”
*2
or “1000”
*3
in
“C.rng” of Cur2.A is selected.
Cur2.A
0.00 to
11.00, 0.0 to
110.0, 0 to
2200
1000
45
Cur2.b 100.0
Cur2.c 50.0
Cur2.d 10.00
CLn Cleaning operation setting 45
CLn
Automatic cleaner
operation setting
If you do not want to activate the cleaner or
there is not a cleaner, set “no”. In this case the
cleaner will be operated by the test mode.
yES, no no 45
tyPE
Cleaning operation type
setting
Specify the way to start cleaning with a internal
timer or a combination of external command.
Note:
This is displayed when “CLn” is set to “yES”.
nor, or, And,
trg
or 46
CyCLE
Internal timer cleaning
cycle setting
Specify the cleaning cycle in hours.
Note:
This is displayed when “CLn” is set to “yES”,
and “tyPE” of CLn is set to “nor”, “or”, or “And”.
0.1 to 168.0
(h)
2.0 46
CLn.t Cleaning time setting
Specify the cleaning time in seconds.
Note:
This is displayed when “CLn” is set to “yES”.
20 to 600
(s)
30 46
Hold.t
Setting of retention time for
transmission output hold
after completion of
cleaning
Specify the hold retention time in seconds after
the completion of the cleaning for the specified
extended time.
Note:
When “CLn” is set to “no”, the hold retention
time is effective for the test cleaning.
60 to 600
(s)
60 46
Display Item Description
Setting
range
Initial
value Refer
to page