horiba HU-200TB-W SS-120-W, Инструкция по эксплуатации

Страница: 70 / 109

Measurement
58
Transmission output check
Transmission output
check screen
(3.8 mA output check)
3.8 mA is output to the transmission output.
Note:
Select the current output with
 /  .
Connect the transmission output to an external recorder or ammeter, and
check for errors.
Transmission output
check screen
(4 mA output check)
4 mA is output to the transmission output.
Note:
Select the current output with

/

.
Connect the transmission output to an external recorder or ammeter, and
check for errors.
Transmission output
check screen
(12 mA output check)
12 mA is output to the transmission output.
Note:
Select the current output with
 /  .
Connect the transmission output to an external recorder or ammeter, and
check for errors.
Transmission output
check screen
(20 mA output check)
20 mA is output to the transmission output.
Note:
Select the current output with

/

.
Connect the transmission output to an external recorder or ammeter, and
check for errors.
Transmission output
check screen
(21 mA output check)
21 mA is output to the transmission output.
Note:
Select the current output with
 /  .
Connect the transmission output to an external recorder or ammeter, and
check for errors.
External contact input check
External contact input
check screen
When 1, 2, 3, and 4 are input, in this order from the left, 1 is displayed.
Note:
Short-circuit the input contact and check the reaction.
Initialization setting
Initialization screen for
setup data and span
calibration data

Initialization screen for the setup data and calibration data

Select “yES” with  /  , and then press ENT to initialize.
Note:
Be aware that the set values will return to the default values.
When the operation is completed, the initial screen will be displayed and
the system will return to the meas mode.
Display Item Description