horiba HU-200TB-W SS-120-W, Инструкция по эксплуатации

Страница: 20 / 109

Overview
8
Operation section

Operation keys
Operation keys are used to switch displays, enter settings, and perform calibration, etc.
You can change the value or item while the display is blinking.
Select a value or item with
 /  , and press ENT. The display will flash, and the setting will be
finished.
To disable the key operations, use the security menu.
Note
Do not press any operation key with the tip of your nail or anything pointed.
Key
Notations in
the text
Description/operation
ESC
Used to go back to the previous menu from any other menu.
While specifying various settings in the hold mode, pressing this key once
will return to the previous item.
Any change that was previously made to any setting is canceled.
Hold
down
Holding down this key in the hold mode will select the meas mode.
HOLD
Hold
down Holding down this key in the meas mode will select the hold mode.
Holding down this key in the hold mode will select the meas mode.
CAL
Hold
down Hold down this key until the CAL indicator turns ON. This activates
the calibration mode.


Used to change the displayed item or value.
Pressing

/

will increase/decrease the value by an increase/decrease of
1. Holding down the key will continuously increase/decrease the value.

and

are used to scroll up and down, respectively. If you scroll too far
up or down with either key, press the other key to return.
ENT
Used to confirm each setting or calibrated value.
Note
No change is reflected if you have returned to the previous menu by
pressing ESC.