horiba HU-200TB-W SS-120-W, Инструкция по эксплуатации

Страница: 32 / 109

Installation
20

Contact output R1 to R3

The terminal screw for the contact output are M4 type.

The applicable electric wire is of 0.75 mm
2
to 5.5 mm
2
(AWG18 to AWG10).

For wire connection, remove the black resin terminal cover for the power terminal by
pulling it forward and raising it, or by detaching the hinge.

Contact capacity
Tip
Set an assignment of the contact in the hold mode.
For each contact, a function can be assigned from among the upper/lower limit, during cleaning,
during calibration, hold state, at the completion of cleaning, and at the completion of calibration.
Resistance load
R1, R2 Within 250 V AC 3 A or 30 V DC 3 A
R3
Within 30 V DC 3 A
R3
R1
R2