horiba HU-200TB-W SS-120-W, Инструкция по эксплуатации

Страница: 7 / 109

Product Handling Information
Operational precautions
Use of the product in a manner not specified by the manufacturer may impair the protection
provided by the product. And it may also reduce product performance.
Exercise the following precautions:

Do not press any operation key with the tip of your nail or anything pointed.

Do not use solutions such as organic solvents.

Do not operate the automatic cleaner while the inside of the detector is filled with water
and the valve is closed. Doing so may damage the cleaner.

The operation of this equipment at any voltage outside the rated range may cause
damage. It is recommended that the fluctuations in power supply voltage fall within a
range of

10

.

Take care about the load connecting to the normally closed relay contacts of the R1 and
R2 which are closed when power is turned OFF.

If a corrosive gas is present in the installation environment, supply clean instrument air
from the purge air supply inlet of the equipment.

Replace the desiccant with a new one periodically. In particular, when measuring cold
water, measurement cannot be performed correctly if dew condensation occurs.
Disposal of the product
When disposing of the product, follow the related laws and/or regulations of your country.