Honeywell TH8320R1003 Скачать руководство пользователя страница 90

Страница: 90 / 140

VISIONPRO

8000 WITH REDLINK™

68-0312—03

Select the system mode(s) to allow dehumidification.

See Fig. 220.

NOTE:

Heat

includes Heat, Emergency Heat and Auto.

If the system is in Auto mode, the thermostat

will allow dehumidification if the last call was for

heat.

Cool

includes Cool and Auto. If the system is in

Auto mode, the thermostat will allow dehumidifi-

cation if the last call was for cool.

Fig. 220.

Set Dehumidifier Fan Control settings. See Fig. 221.

•

Tstat Controls Fan

Thermostat turns on the dehumidifier and the fan

when dehumidification is needed.

•

Equip Controls Fan

Thermostat turns on the dehumidifier when

dehumidification is needed. The fan is controlled by

the equipment.

Fig. 221.

Set the desired lockout option. See Fig. 222.

Fig. 222.

NOTE: ISU 1014 gives the option to lockout ventilation

on calls for dehumidification. This helps main-

tain the desired humidity level.

Dehumidification Away Mode

Dehumidification Away Mode for a commercial application is

identical to Dehumidification Away Mode for a residential

application. See “Dehumidification Away Mode” on page 85

and “Set up Dehumidification Away Mode” beginning on

page 86.

Control Dehumidification Level

Touch MENU and select Dehumidification.

Fig. 223.

Fig. 224.

MCR34100

MCR34130

Dehumidification

Equipment Status

Содержание TH8320R1003













































































































































Результаты поиска

Содержание TH8320R1003

Отзывы:

Honeywell TH8320R1003, Руководство по установке, Страница: 90 / 140

Результаты поиска

Содержание TH8320R1003

Отзывы: