Honeywell TH8320R1003 Скачать руководство пользователя страница 61

Страница: 61 / 140

VISIONPRO

8000 WITH REDLINK™

68-0312—03

Setting the Time/Date

Touch the current time. The screen displays Select Option.

Fig. 80.

Touch Time or Date, then touch Select.

Fig. 81.

Touch





until the proper time/date is displayed.

Touch Done to save or Cancel to ignore changes.

Fig. 82.

Touch Home to redisplay the Home screen.

NOTE: The date is not shown on the home screen; how-

ever, it should be set to allow the thermostat to

adjust time automatically for daylight saving time

and for other features such as vacation hold.

Setting the Fan

Touch FAN to display fan settings.

Fig. 83.

Touch On, Auto, Circ, or Follow Schedule.

Touch Done to save and exit.

• On: Fan is always on.

• Auto: Fan runs only when heating or cooling system is

on.

• Circ: Fan runs randomly, about 35% of the time

(residential only).

• Follow Schedule: Fan controlled by program.

Fig. 84.

NOTE: In commercial use, touch Auto or On to temporar-

ily override the programmed fan schedule.

Setting System Mode

Touch SYSTEM to display system settings.

Fig. 85.

Touch desired option

• Heat: Controls only the heating system.

• Cool: Controls only the cooling system.

• Off: Heating/cooling systems are off.

• Auto: Selects heating or cooling depending on the

indoor temperature.

• Em Heat (heat pumps with aux. heat): Controls

auxiliary/emergency heat. Compressor is locked out.

Fig. 86.

Touch Done to save and exit.

NOTE: The Auto and Em Heat system settings may not

appear, depending on how your thermostat was

installed.

MCR34092

MCR34155

Select Option

Time

Date

MCR34094

Please Set Time

:30 PM

MCR34096

MCR34097

Auto

Circ

MCR34098

MCR34099

Heat

Cool

Auto

Off

Содержание TH8320R1003













































































































































Результаты поиска

Содержание TH8320R1003

Отзывы:

Honeywell TH8320R1003, Руководство по установке, Страница: 61 / 140

Результаты поиска

Содержание TH8320R1003

Отзывы: