Honeywell TH8320R1003 Скачать руководство пользователя страница 86

Страница: 86 / 140

VISIONPRO

8000 WITH REDLINK™

68-0312—03

Fig. 202.

Set up Dehumidification Away Mode

Select Allowed at ISU 918. See Fig. 203.

Fig. 203.

Set Fan Control settings. See Fig. 204.

• On: Fan is always on.

• Automatic: Fan runs only when cooling system is on.

• Circulate: Fan runs randomly, about 35% of the time.

Fig. 204.

Set temperature and dehumidification settings. See Fig.

205.

•

Low Limit Temperature Setting

If the cooling system is used to control humidity while

Dehumidification Away Mode is active, the thermostat

allows the cooling system to lower the indoor air to the

Low Limit Temperature Setting to reach the

Dehumidification Setting at ISU 920.

•

Temperature Setting

The temperature maintained while Dehumidification

Away Mode is active and the desired humidity level is

satisfied.

•

Dehumidification Setting

The desired humidity level while Dehumidification

Away Mode is active.

Fig. 205.

Содержание TH8320R1003













































































































































Результаты поиска

Содержание TH8320R1003

Отзывы:

Honeywell TH8320R1003, Руководство по установке, Страница: 86 / 140

Результаты поиска

Содержание TH8320R1003

Отзывы: