Honeywell HercuLine 10260S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 122

2. Specifications - Model Selection Guide
Revision 5 10260S HercuLine® Actuator Installation, Operation and Maintenance Manual 11
7/07
Model Selection Guide
The following 10260 Smart Actuator models are covered in this manual. You can verify the model
description of your actuator by comparing the model number stamped on the top cover identification plate
with the following tables in this model selection guide.
Instructions
Select the desired key number. The arrow to the right marks the selection available.
Make the desired selections from Tables I thru VIII using the column below the arrow.
A dot ( ) denotes unrestricted availability.
Key Number I II III IV V VI VII VIII
_ _ _ _ _ _ - _ - _ _ _ - _ _ _ - _ - _ - _ _ _ _ _ - _ _ _ - _ _
KEY NUMBER - Torque and Speed
Selection Availability
Output Torque
(lb. - ft.) (N - M)
10 (15) 10 12 10261S
20 (27) 20 24 10262S
40 (55) 40 48 10264S
60 (80) 60 72 10266S
40 (55) 20 24 10267S
80 (110) 40 48 10268S
150 (200) 60 72 10269S
200 (270) 40 48 10263S
300 (400) 60 72 10265S
TABLE I - POWER SUPPLY - SINGLE PHASE
120 VAC 60 Hz Single Phase 120 VAC 60Hz Motor 1
120 VAC 50 Hz Single Phase 120 VAC 50Hz Motor 2
220/240 VAC 60 Hz Single Phase 220/240 VAC 60Hz Motor 3
220/240 VAC 50 Hz Single Phase 220/240 VAC 50Hz Motor 4
TABLE II - ANALOG INPUT/OUTPUT SIGNALS
Input 4-20 mA, 0-20mA (
1-5 Vdc, 0-5 Vdc, 1-10 Vdc, 0-10Vdc
)
0 _ _
Output
No Analog Position Output _ 00
4-20 mA, 0-20mA (
1-5 Vdc, 0-5 Vdc, 1-10 Vdc, 0-10Vdc
)
_ 20
Slidewire Emulation _ 40
TABLE III - SWITCH AND RELAY OUTPUTS (2 mech end-of-travel limits standard)
Auxiliary Switches None 00 _
and 2 Aux. SPDT Switches 20 _
Relay Outputs 4 Aux. SPDT Switches 40 _
2 Aux. + 2 Programmable Relay Outputs 22 _
2 Programmable Relay Outputs 02 _
4 Programmable Relay Outputs 04 _
Auto/Manual Switch None _ _ 0
One Auto/Manual Switch with Out-of-Auto Contact _ _ 1
TABLE IV - CONFIGURATION INTERFACE
Remote
(Note 1)
None - requires HercuLink
TM
0
Local Integrally mounted local display/keypad interface 1
TABLE V - COMMUNICATIONS/PROTOCOL
Modbus RTU RS485 RS-485 Modbus compliant - standard with EEU 0
HART HART Communications Protocol 2
Full Travel Stroking - Time in Seconds
60 Hz 50 Hz