Honey Bee Grain Belt Plus, Руководство пользователя

Страница: 50 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Convert Hitch Assembly for Transport
1. Extend the hitch tube assembly by
disengaging the lock pin, and sliding
the hitch tube out to its extended
position.
2. Secure in this position by re-engaging
the lock pin.
3. Remove the jack assembly from
storage by loosening the L-bolt,
removing the hitch pin and sliding the
jack from the storage tube. (Jack is
located at the rear left side of the
header.) Replace the hitch pin into the
storage tube.
4. Install jack assembly onto hitch tube,
and secure in place by tightening L-Bolt
and re-attaching safety chain.
5. Release the feeder house cylinder
locks. Restart the combine. Lower the
header until transport wheels make light
contact with the ground. Turn combine
off and dismount.
6. Remove safety pin from jack leg, and
lower jack leg to the ground. Raise the
hitch end of the table using the jack
until the header is sitting level. Once
level, re-insert safety pin into jack leg.
Be sure safety lock pin and safety clip are properly in place so the hitch jack is
securely fastened to the hitch tube.
Rev. 07 - 07/29/08 48
Illustration 3-26: Hitch Expanded for
Transport
Illustration 3-27: Removing Jack