Honey Bee Grain Belt Plus, Руководство пользователя

Страница: 125 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Finger Extension Timing Adjustment
The extension and retraction point of the fingers may be adjusted in order to suit the type of
crop being harvested.
To adjust the point of extension/ retraction of
the fingers, locate timing plate arm on the
right-hand side of the subframe:
1. Loosen lock bolt.
2. Pull the timing plate arm backward to
increase the finger extension toward
the top and back of the auger drum.
3. Push the timing plate arm forward to
increase the finger extension toward
the front of the auger.
4. When proper indexing is achieved, re-
tighten lock bolt.
Normal adjustment of the fingers is to have
them fully extended at the two or three
o’clock position (viewing the auger from the
right-hand end of the tube.).
Refer to this decal for recommendations for
heavy/light crop conditions.
Under all situations, adjust
the auger fingers so that they
clear the pan or pan inserts
by approximately ¼” (6 mm)
to ½” (13 mm).
Rev. 07 - 07/29/08 123
Illustration 11-4: Finger Extension Timing
Adjustment
Illustration 11-5: Auger Timing Decal