Honey Bee Grain Belt Plus, Руководство пользователя

Страница: 133 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
To Replace a Section:
1. Remove the guard to expose the section.
2. Unbolt the section and install a new one.
3. Tighten the section bolts and nuts.
4. Re-install the guard.
OR:
1. Turn the knife by hand until one section
bolt is exposed. This can be done by
inserting a metal rod into the hole on the
knife drive flywheel, and pushing or pulling
in the desired direction.
2. Remove the bolt.
3. Continue turning the knife drive until the
other bolt is exposed.
4. Remove second bolt along with the
section. Install a new section and first bolt,
and tighten. Turn knife back, and tighten
other bolt.
When installing sections, remember to rotate the beveled serrations, one
facing up and the next one facing down (See the illustrations below.
Rev. 07 - 07/29/08 131
Illustration 12-3: Knife Drive Flywheel
Illustration 12-5: Sickle Orientation
Illustration 12-4: Guard - Side View