Honey Bee Grain Belt Plus, Руководство пользователя

Страница: 138 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
To repair a broken knife back:
If the knife breaks during use, repairs can usually be made
with a connector bar. Most often the knife back will break
across a bolt hole that holds a sickle section in place. To use
the connector bar properly, the damaged section needs to be
cut out and/ or a section of knife removed. If the knife breaks
close to the knife head end, remove that section of knife,
reconnect the knife head, and then add another piece to the far
end of the knife where there is less cutting stress on the knife.
The joint in the two knives must be centered under a full sickle
section, with the connector bar centered underneath the joint.
(DO NOT place the joint where two sickle sections join)
Check the knife for dull/ damaged guards and sections,
replacing as necessary.
Feather Plates
The Grain Belt Plus header is equipped with
feather – plates that span the width of the cutter
bar. The function of the feather plates is to provide
a transition for the cut crop traveling from the knife
to the draper. As these items are fastened
individually to the guards, they are allowed to
travel in unison with the guards and cutter bar in
uneven terrain.
Rev. 07 - 07/29/08 136
Illustration 12-16: Knife Back
- Detail
Illustration 12-17: Feather Plates