Honey Bee Grain Belt Plus, Руководство пользователя

Страница: 124 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Fore and Aft Adjustments of the Finger Auger
The finger auger can be adjusted forward and backward by moving the carrier arm. The
slotted hole in the carrier arm allows about 2" (50 mm) of travel. Both sides should be
adjusted equally. When moving the auger drum check to see that the auger flighting and/or
the auger fingers do not contact the feeder chain on the combine, or on the feeder deck
drapers.
1. Locate adjustment bolt (1) on each side
of the subframe.
2. To decrease the clearance between the
subframe and the auger; loosen lock
nut (2) and turn lock nut (3) clockwise.
To increase the clearance, turn lock nut
(3) counter-clockwise.
3. When the desired clearance has been
attained, re-tighten lock nuts (2) and
(3). For proper performance, each end
of the finger auger should be adjusted
with the same amount of clearance.
After making height, and/or fore-aft adjustments to the auger, rotate the finger
auger slowly by hand to be sure the flighting and the fingers do not contact the
feeder house, shrouds, feeder chain, drapers, or header decks. Damage to the
combine or header parts from improper adjustment will not be covered by
warranty.
Rev. 07 - 07/29/08 122
Illustration 11-3: Finger Auger Fore & Aft
Adjustment