Honey Bee Grain Belt Plus, Руководство пользователя

Страница: 37 / 179

Honey Bee Manufacturing Ltd.
Grain Belt Plus Header – Owner's Manual
Engage parking brake on the combine, shut the engine down, and wait for all
moving parts to stop before leaving the cab.
5. Check the clearance and alignment of the feeder house to the adapter plate on both
sides as well as on the top and bottom. Be sure that nothing is interfering with the
alignment of the feeder house to the adapter plate or the finger auger.
6. Inspect the position of the finger auger in the subframe to be sure it is not contacting
the shrouds on the front of the feeder house. If required, adjust the finger auger
position (see the “Finger Auger” section of this manual).
7. 6.If feeder house and the adapter plate ARE NOT properly aligned, repeat steps 2, 3,
4, and 5. If feeder house and the adapter plate are properly aligned, restart the engine
and raise the feeder house (and header) to its full height.
Engage parking brake on the combine, shut the engine down, and wait for all
moving parts to stop before leaving the cab. Install feeder house cylinder
locks as described in your combine operator's manual.
8. With header in the fully raised position insert all lock pins, hooks and/or bolts as
described in your combine operator’s manual.
Be sure these pins are properly aligned and securely in place before
proceeding!
Rev. 07 - 07/29/08 35