Honda UMS425E, Руководство пользователя

Страница: 5 / 76

5 EN
FITTING
HANDLES
The handle [1] must be installed
on the transmission tube with
the 3 screws and washers
supplied using the Torx wrench
[2]. Secure the handle in the most
comfortable position for use.
Fitting is to be performed using
the tools in the kit supplied with
the appliance.
FLEXIBLE CUTTING MEANS
1. Block the rotation of the shaft by
inserting the hexagonal wrench [3]
in the appropriate hole [4].
2. Tighten the flexible cutting means
on the shaft, by turning it
counterclockwise.
COMPLETE GUARD
Your grass trimmer is supplied with a
guard [5].
1. Install the guard on the machine
with the two screws and washers
supplied with the Torx wrench
[2].
2. Pull down the cover [6] on the
front of the protector.
Never use the grass trimmer without its debris shield.
PRELIMINARY PREPARATION
AND CHECKS
FILLING THE FUEL TANK
Use unleaded petrol E10, with a Research Octane
Number of 91 or higher (a Pump Octane Number
of 86 or higher).
The pressure inside fuel
tanks may increase when
the ambient temperature
rises.
The cap should be
removed with care to
avoid any splashing of
fuel.
Fuel should be stored in a
cool place, for short periods
of time, and must never be
left in direct sunlight.
Fuel specification(s) necessary to maintain the performance of the
emissions control system: E10 fuel referenced in EU regulation.
CAUTION: CAUTION:
• Clean the fuel tank cap and its edges to prevent foreign bodies from
entering the tank.
• Fill the fuel tank with a suitable funnel or a jerrycan with a suitable spout.
• For easy filling, place the machine in the operating position.
• Make sure that the machine remains in a stable position throughout
this operation so that it does not fall over.
Petrol is extremely flammable and, in some circumstances, it is
explosive.
Fill the fuel tank in a well ventilated area with the engine
switched off.
Do not smoke and avoid any flames or sparks in the area where
filling is performed and where the fuel is stored.
Do not overfill the fuel tank (the fuel level must be below the filler neck).
After filling the tank, make sure that the tank cap is correctly fitted.
Take care not to spill fuel during the tank filling operation.
Petrol splashes or vapours could catch fire.
Make sure that any spilled petrol has evaporated and that
vapours have dispersed before starting the engine.
Avoid direct contact of petrol with the skin and do not breathe
the vapours.
KEEP FUEL OUT OF REACH OF CHILDREN.
FUEL CONTAINING ALCOHOL
Never use petrol that is stale, contaminated, or mixed with oil.
If you decide to use a petrol containing alcohol (gasohol), be sure its
octane rating is at least as high as that recommended by Honda.
There are two types of "gasohol": one containing ethanol, and the other
containing methanol.
Do not use gasohol that containing more than 10% ethanol.
Do not use petrol containing more than 5% methanol (methyl or wood
alcohol) and that does not also contain co-solvents and corrosion
inhibitors for methanol.
NOTE:
• Fuel system damage or engine performance problems resulting
from the use of petrol that contains more alcohol than
recommended is not covered under the warranty.
• Before buying petrol from an unfamiliar station, first determine if
the petrol contains alcohol. If it does, find out the type and
percentage of alcohol used.
If you notice any undesirable operating symptoms while using a
particular petrol. Switch to a petrol that you know contains less than
the recommended amount of alcohol.
[2] Spark plug wrench/Torx wrench [3] Hexagonal wrench
[A] 765 mm
B3 C11 D3
SAFETY
A1 A4
[1]
[2]
Rubber
spacer
Engine side
[A]
[3]
[4]
[2]
[5]
[6]
[5]
Tank capacity 0.58

(580 cc)
Recommended fuel Premium unleaded
B3 C12
SAFETY