Honda UMS425E Скачать руководство пользователя страница 1

1 EN

2021 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Châtaigniers

45140 ORMES - FRANCE - All rights reserved

3RVL6715

XXXX

00X3R-VL6-7150

Printed in France

OWNER’S MANUAL

(Original instructions)

UMS425E

Grass trimmer

UMS425E1

FOREWORD

Dear Honda user,
You have bought a Honda grass trimmer and we thank you for the 
confidence you have shown in us.
This manual is to help you become familiar with your new machine so 
that you can use it safely and keep it properly maintained.
To bring our customers the latest technological advances, new 
equipment and materials and the full benefit of our experience, we 
regularly improve the models in our product line. As a result, the 
information and characteristics given in this manual are subject to 
modification without notice and without any obligation to update the 
manual.
The illustrations in this manual show the most suitable model to 
represent the topic dealt with.
If you encounter any problem or have any question regarding your 
machine, please contact your dealer or an authorized Honda retailer.
Keep this manual close at hand for ready reference and, if you sell your 
machine, please make sure you supply this manual with it.
We recommend that your read the terms of guarantee so that you 
fully understand your rights and responsibilities.
The guarantee is a separate document provided by your dealer. No 
part of this publication is to be reproduced without prior written 
consent.

SAFETY INSTRUCTIONS

For your own safety and operating comfort, it is highly recommended
that you read this manual in full.
Pay attention to these symbols and their meaning:

Warns against a risk of serious bodily injury or fatal accident if
instructions are not complied with.

CAUTION:

• Warns against a risk of bodily injury or equipment damage if

instructions are not complied with.

NOTE :

 Indicates a source of useful information.

The model of your machine is indicated on its "identification label", by
a series of letters and figures (

see page 4

).

CONTENTS

Foreword   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety instructions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety stickers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Identification of machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
General description   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Preliminary preparation and checks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Starting and stopping the engine  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Transport and storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Technical specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Major Honda distributor addresses  . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
“EC-Declaration of Conformity” CONTENT OUTLINE . . . . . . . . . . . .14

Write down 

y

our 

m

achine's serial nu

m

ber here

Write down 

y

our 

m

achine's 

m

odel here

Содержание UMS425E













































































Отзывы: