Honda CBF600N, Руководство по обслуживанию, Страница: 489 / 620

ANTI–LOCK BRAKE SYSTEM (ABS; CBF600SA/NA)
16-7
ABS SELF-DIAGNOSIS INFORMATION
SYSTEM DESCRIPTION
ABS PRE-START SELF-DIAGNOSIS SYSTEM
The ABS pre-start self-diagnosis system diagnoses the electrical system as well as the operating status of the modulator.
When there is any abnormality, the problem and the problematic part can be detected by outputting the problem code.
When the vehicle speed is approximately 6 km/h (4 mph) or more, the wheel speed sensor signal is sent to the ABS control
unit, then the pre-start self-diagnosis system operates the pump motor (inside the modulator) and detects whether the
hydraulic operation is normal, and it completes the pre-start self-diagnosis.
When the ABS is normal, the ABS indicator goes off just after a road speed of 10 km/h (6 mph) indicating that the diagnosis
is completed.
If a problem is detected, the ABS indicator blinks or comes on and stays on to notify the rider of the problem. The self-diag-
nosis is also made while the motorcycle is running, and the indicator blinks when a problem is detected.
When the indicator blinks, the cause of the problem can be identified by retrieving the problem code following the speci-
fied retrieval procedure (page 16-8).
PRE-START SELF-DIAGNOSIS PROCEDURE (Daily check)
1. Turn the ignition switch to "ON".
2. Make sure the ABS indicator comes on.
3. Start the engine.
4. Ride the motorcycle and increase the vehicle speed to approxi-
mately 10 km/h (6 mph).
5. The ABS is normal if the ABS indicator goes off.
CBF600SA:
ABS INDICATOR
CBF600NA:
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
email: info@motomatrix.co.uk