Introduction
This manual describes the information required for the selection of HSD7 series AC servo drivers, the design
of servo drivers, trial operation, adjustment, operation and maintenance. To correctly use the HSD7 series AC
servo driver, please read this manual carefully.
Please take good care of this manual so that it can be read and referenced at any time when necessary.
How to use the manual
The basic terminology used in this manual
The terms used in this manual are described below.
Basic terms
Meaning
Servo driver
HSD7 series servo driver
Servo motor
S, SA, SC series servo motors
Servo drive
Servo driver and servo motor combination
Servo system
A servo control system that includes the combination of a Servo Drive with a host
controller and peripheral devices.
Servo ON
Supplying power to the motor.
Servo OFF
Not supplying power to the motor.
Servo lock
A state in which the motor is stopped and is in a position loop with a position
reference of 0.
Main loop cable
Cables connected to main circuit terminals (main circuit power cable, control power
cable, servo motor main circuit cable, etc.)
Labeling of icons
The following icons are designed in this book to make readers understand the distinction between the
contents of the commands. And use these icons where necessary.
Important
Indicates precautions and restrictions that must be observed.
Meanwhile, it also indicates that an alarm will be raised, but it will not cause damage to the device.
Terminology
explanation
Indicates the explaining of difficult terms and explaining the terms that have not been explained in advance.
Indicates examples of operations or settings, etc.
Indicates additional items or information that is helpful to use after understanding.
Case
Supplementary
notes
字体颜色
:
自动设置
设置格式
[
周
]:
字体颜色
:
自动设置
设置格式
[
周
]:
字体颜色
:
自动设置
设置格式
[
周
]:
字体颜色
:
自动设置
设置格式
[
周
]:
