Hitachi L100 IP Series, Инструкция по эксплуатации

Страница: 85 / 94

Appendix A – Printed form for user defined parameter settings
A-1
Appendix A – Printed form for user defined parameter
settings
L100IP series inverters provide many functions whose parameters can be set by the user. It is recommended
that the parameters that have been set by the user be recorded to speed the investigation and repair in the
event of a failure. You can use one of the “Set value” columns that have been provided in this chapter for
your convenience.
If the information in the column “Function” should not provide a sufficient explanation you can still use the
extensive function descriptions contained in chapter 8 “Using the digital operator”.
L100IP
This information is written on the
nameplate located on the bottom side
of the L100IP inverter.
Serial No.
Display Function Standard
setting
S e t v a l u e
F 01
Frequency set value 0.0
F 02 Acceleration time 1 (in s) 10.0
F 03 Deceleration time 1 (in s) 10.0
F 04 Motor direction 00 (forward)
Display Function Standard
setting
S e t v a l u e
A 01 Frequency set value source
00-NOT IN USE 01-Input O/OI
02-Functions
F 01 / A 20
01
A 02 Run command source
01-Input FW/RV 02-RUN key 01
A 03 Base frequency
A 04 Maximum frequency
-FE: 50
-FU: 60
A 11 External frequency start point 0
A 12
External frequency end point 0
A 13 External frequency start point bias (in %) 0
A 14 External frequency end point bias (in %) 100
A 15 External frequency start pattern
00-According to
A 11 and A 13 01-0Hz
01
A 16 Analog input filter time constant 8
A 20 Frequency set value (
A 01
must be = 02)
0.0
A 21 1. Multistage frequency setting 0.0
A 22 2. Multistage frequency setting 0.0
A 23 3. Multistage frequency setting 0.0
A 24 4. Multistage frequency setting 0.0
A 25 5. Multistage frequency setting 0.0
A 26 6. Multistage frequency setting 0.0
A 27 7. Multistage frequency setting 0.0
A 28
8. Multistage frequency setting 0.0
A 29
9. Multistage frequency setting 0.0
A 30 10. Multistage frequency setting 0.0
A 31 11. Multistage frequency setting 0.0
A 32 12. Multistage frequency setting 0.0
A 33 13. Multistage frequency setting 0.0
A 34 14. Multistage frequency setting 0.0
A 35 15. Multistage frequency setting 0.0