Hitachi L100 IP Series, Инструкция по эксплуатации

Страница: 79 / 94

Chapter 13 – The optional remote operators
13-5
Standard setting Funct.
No.
Function Display
-FE -FU
Parameter
range
Refer
to
F-36 Carrier frequency
CARRIER 12.0kHz
5.0kHz 5.0kHz 0.5~16
b 83
F-37 Function of FM terminal MONITOR A-F A-F A-F A-F, A, D-F C 23
National version INIT SEL EUR EUR USA EUR, USA b 85
Motor direction
INIT DOPE FWD
FWD FWD FWD, REV
F 04
F-38
Initializing mode INIT MODE TRP TRP TRP TRP, DATA b 84
PID control active / not active PID SW OFF OFF OFF OFF, ON A 71
P (proportional) gain of PID control
PID P 1.0
1.0 1.0 0.2~5
A 72
I (integral) gain of PID control PID I 001.0 1.0 1.0 0~150 A 73
D (differential) gain of PID control PID D 000.0 0.0 0.0 0~100 A 74
Scale conversion of PID control PID CONV 01.00 1.00 1.00 0.01~99.9 A 75
F-43
Feedback signal location PID INPT CUR CUR CUR CUR, VOL A 76