Hitachi GR4000-160E1, Руководство по установке

Страница: 91 / 277

GS4000 Installation Guide Revision 4.00
520-10-026-30X
1-73
(3) S22-10G4RX
The S22-10G4RX is a Network Interface providing 4 Ethernet ports (10GBASE
-
LR)
.
*
NOTE: XFP is required when using S22-10G4RX. See the section 1.8 “GBIC, SFP, and
XFP” for information about XFP.
Front View
The LED indicators are listed in Table 1.6-22
Figure 1.6-24 Front Panel of S22-10G4RX
LEDs
Table 1.6-22 LED Indications on the S22-10G4RX Front Panel
Name Color Role Action status
LINK Green Green (ON)
：
link established
ACT Green Green (ON)
：
line operation possible
（
line is open
）
LINE ERR Yellow Yellow (ON) ： failure detected
R Green Green (ON)
：
frames being received
T Green Green (ON)
：
frames being sent
SIG － DT Green
Shows the action
status of an interface
line.
Green (ON) ： Signal Detect operation detected
*
NOTE: The LED on the front panel of the device indicates the action status of an
interface line. The action status of an interface line is shown by the PSU LED.
For information about the PSU LED, see the section 1.1 “Chassis”.
*
NOTE: When all of the LEDs shown in Table 1.6-22 above is turnd off, and even
though the PSU LED is “Green(On)”, the NIF is not active.
LEDs Ethernet Port