manualshive.com logo in svg

Hitachi Compute Rack 220S, Руководство по замене

Поделиться
Скачать
Hitachi Compute Rack 220S Скачать руководство пользователя страница 77

 

 

Setup after maintenance 

5-3

 

Hitachi Compute Rack 220S CRU Replacement Guide 

Restoring the Web console or Remote Console settings 

The server management settings as the Web console and the Remote Console 

application will be lost when a motherboard is replaced. 
For this reason, if either the Web console or the Remote Console application is 
used, restore the server management settings from the Web console. 

The server management settings should be backed up and kept in advance in 
preparation for a failure. 

For the backup and restoration of server management settings, see 

Hitachi 

Compute Rack 220S Remote Management User’s Guide

. 

 

 

Depending on the fault status, the BMC network settings of the 
management network interface might be returned to the factory 

defaults. In this case, reconfigure the BMC network. 

 

BIOS resetting 

System BIOS or RAID BIOS settings might be returned to the factory defaults 
when a motherboard or a RAID card is replaced. 

In this case, reset the BIOS settings using the BIOS setup utility, such as "Setup 
menu" or "MegaRAID WebBIOS". 
If you change the BIOS settings from the factory defaults, note down all the 

changed setting values after replacement in case of failure. 

For system BIOS and RAID BIOS settings, see 

Hitachi Compute Rack 220S BIOS 

Guide

. 

 

 

Similarly, BIOS settings of a PCI card might be returned to the factory 
defaults when replace a PCI card.   
For the BIOS settings of an optional PCI card, see Optional PCI card 

instruction manual. 

  

Содержание Compute Rack 220S

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды