Hioki 8804, Инструкция по эксплуатации

Страница: 152 / 238

130
―――――――――――――――――――――――――――――――――――――――
11.3 Setting the Trigger Types
―――――――――――――――――――――――――――――――――――
Trigger Screen
Waveform Screen
1 2 3 4
1 2 3
Selection
Memory recorder
OFF, 0.1, 0.2, 0.5, 1.0, 2.0 DIV
(magnification ratio:
× 1 is standard)
Recorder
X-Y CONT recorder
OFF, ON
Method (on the trigger screen and waveform screen)
This example illustrates settings for channel 1 (A).
The channel 2 (B) can be set in the same manner.
Using the
CURSOR keys, move the flashing cursor in the
order indicated by the numbers in the figure, and make
the settings.
1. Set the trigger type: Select "
OUT
".
2. Set the lower trigger level ( ):
Using the
＋
and
−
keys, set the
threshold value (voltage value).
The lower trigger level cannot be
set more than the value of the upper
trigger level.
3. Set the upper trigger level( ):
This is done in the same manner as
step 2. The upper trigger level
cannot be set less than the value of
the lower trigger level.
4. Set the trigger filter (trigger screen
only):
Select by using the
＋
and
−
keys.
This setting cannot be made on the
waveform screen.
Depending on the functions, the
contents which can be set vary.