Hillrom Welch Allyn Connex ProBP 3400, Руководство по обслуживанию, Страница: 60 / 64

10 percent chlorine bleach/90 percent water solution
1. Wipe the device with a clean cloth slightly dampened with a 10 percent bleach and 90 percent
water solution.
2. Rinse with a clean cloth slightly dampened with clean water.
3. Allow the device surface to dry for a minimum of 10 minutes before using the device.
Clean the accessories
Wipe the NIBP hose and any reusable cuffs with a damp cloth moistened in a mild detergent
solution.
The same cleaning agents used to clean the device can be used on the stand and mounting
accessories.
WARNING
Electric shock hazard. If you clean the power transformer take the
following precautions:
• Ensure the power transformer is unplugged from the outlet.
• Ensure cleaning cloth is not dripping or over saturated
• Apply minimal pressure on wipe when cleaning; avoid wiping gap or connection areas on the
power transformer and wall plug.
• Ensure the power transformer, wall plug, and cord are dry before plugging into outlet.
NOTE
Clean the device on a routine basis, according to your facility's protocols
and standards or local regulations.
Factory defaults
Setting Default value
Bluetooth Enable
Unit of measure mmHg
Pressure presets 160 mmHg
Data management Auto overwrite
MAP On
Language English
Disassembly and repair reference
Screws
The following table lists torque specifications for all screws.
56 Appendices
Welch Allyn® Connex® ProBP™ 3400 digital blood pressure device