manualshive.com logo in svg

Hillrom Welch Allyn Connex ProBP 3400, Руководство по обслуживанию, Страница: 49 / 64

Поделиться
Скачать
Hillrom Welch Allyn Connex ProBP 3400 Скачать руководство пользователя страница 49

Test 

Bluetooth

 radio functionality

Use this procedure to verify 

Bluetooth

 radio functionality on devices with the 

Bluetooth

 feature

enabled. The procedure tests whether the device can be detected by a 

Bluetooth

 technology-

enabled computer.

Required equipment

•

Computer with

 Bluetooth

 technology enabled and the Welch Allyn Service Tool installed

•

Device to be tested

•

USB 2.0/5-pin Mini-B cable

Before you begin

If the device and the computer are already paired, unpair them using the 

Bluetooth

 software on the

computer. Consult the instructions provided by the software manufacturer.

To verify 

Bluetooth

 radio functionality

1. Use the service tool to acquire the serial number of the device.

a. Start the service tool on the computer.
b. If the Welch Allyn screen appears, click 

Service.

c. If prompted, log on.

The Device list page appears.

d. If any device tabs are open, close them.
e. Use the USB cable to connect the device to the computer.
f.

If the device is not already on, power it up.

The device name and serial number appear on the Device list page.

g. Keep the service tool open so that you can access the serial number later in this

procedure.

2. Place the device into Pairing mode.

a. On the device, navigate to 

Settings

 > 

Bluetooth radio

.

b. Confirm that 

Enable

 is selected.

c. Select 

Pair

.

The device indicates that it is in Pairing mode by displaying the message, “Pairing.”

3. Verify that the computer detects the device.

a. Use the 

Bluetooth

 software on the computer to search for discoverable 

Bluetooth

 devices.

Consult the instructions provided by the software manufacturer.

The software detects the device and displays the device serial number.

b. Verify that the serial number displayed by the 

Bluetooth

 software matches the serial

number displayed on the Device list page of the service tool.

If the

 Bluetooth

 software detects the device, the radio is functioning properly. Completion of the

pairing process is not required for this test.

Service Manual

Functional verification tests  45

Содержание Welch Allyn Connex ProBP 3400

































































Отзывы:

Нет отзывов